Planning with SIVACON 8 PS - Siemens

Planning with LDA/LDC4.2 System components4.2.4 Straight trunking unitsStraight trunking units are used to transmit electrical power and to supply loads.Straight trunking units for horizontal installationWithout tap-off pointsWith tap-off pointsStandard lengthsOptional lengthsStraight trunking unit for expansioncompensationstandard lengthStandard lengthswith 1, 2 or 3 tap-off pointsOptional lengthswith 2 tap-off pointsOptional lengthswith 1 tap-off pointLengthType1.2 m LD.....-1.62.4 m LD.....-2.43.2 m LD.....-3.20.50...0.89 m LD.....-1W*0.90...1.59 m LD.....-2W*1.61...2.39 m LD.....-3W*2.41...3.19 m LD.....-4W*1.2 m LD.....-D3.2 m LD.....-K-3, 2-3AD3 tap-off points3.2 m LD.....-K-3,2-2AD2 tap-off points3.2 m LD.....-K-3,2AD1 tap-off point2.20...2.40 m LD.....-K-2W*-2AD2.41...3.20 m LD.....-K-3W*-2AD1.20...1.60 m LD.....-K-1W*-AD1.61...2.40 m LD.....-K-2W*-AD2.41...3.20 m LD.....-K-3W*-ADW = optional length* = length in mAD Tap-off pointPlanning with SIVACON 8 PS110 Planning Manual, 10/2007, A5E01541101-01