Planning with SIVACON 8 PS - Siemens

Planning with LDA/LDC4.3 Technical data4.3 Technical data4.3.1 LDA/LDC systemsStandards and regulations DIN EN 60439-1/VDE 0660-500DIN EN 60439-2/VDE 0660-502Resistance to extreme climates Damp heat, constant, acc. to IEC 60068-2-78Damp heat, cyclic, acc. to IEC 60068-2-30Ambient temperature min./max./24-hour average °C –5/+40/+35Degree of protectionIP31 ventilated (with busbars installed horizontally and flat)IP34 ventilated (with busbars installed horizontally and edgewise)IP54 enclosedStandard mounting positionBusbars edgewise in the systemTorque for single-bolt terminal Nm 80Busbar surface treatmentEntire length coated with insulating material, nickel-plated and tinned:LDA;tinned: LDCMaterial trunking units, tap-off unitsSheet steel with powdered paint finishColour of trunking units, tap-off unitsRAL 7035 (light grey)DimensionsSee Dimension drawingsWeightSee WeightsRated insulation voltage V~ 1000According to DIN EN 60439-1 V~ 1200Overvoltage category/pollution degree III/3 acc. to EN 60947, IV/3 for power transmission acc. to EN 60947Rated operating voltage V~ 1000 for overvoltage category III/3,690 for overvoltage category IV/3Rated frequency Hz 16 2/3 ... 60Planning with SIVACON 8 PSPlanning Manual, 10/2007, A5E01541101-01 127