Planning with SIVACON 8 PS - Siemens

Planning with BD2A/BD2C3.2 System componentsFlexible movable trunking units in X/Y/Z directionLengthType1.25 m 160 ... 400 A BD2-400-R1,75 m 630 ... 800 A BD2-800-RCustom lengths up to 3.25 mare possible3.2.5 Feeder unitsFeeder units are used to feed power into the busbar trunking system with single-core ormulti-core cables as well as to feed power directly to low-voltage distribution equipment. Theincoming supply can be set up as an end feed or a centre feed.3.2.5.1 End feeder unitsCommon featuresAll end feeder units have the following common features:Cables can be fed in from the front end. Units with cable compartments support cable entryfrom the side. In the case of multi-core conductor entry, a sectional entry flange with cablesleeves and cable propping bar is standard; in the case of single-core conductor entry, analuminium plate is standard. The cables are connected using lugs and bolts. The bolts aresupplied with the unit. When connecting 5-conductor cables you will need to remove thebridge between PE and N which will have been fitted prior to delivery. The phasing can bechanged locally.Incoming cable connection unit: Multi-core entry BD2.-...-EE, single-core design BD2.-...-EE-EBALEnd feeder units: Incoming cable connection unitPlanning with SIVACON 8 PS44 Planning Manual, 10/2007, A5E01541101-01