Planning with SIVACON 8 PS - Siemens

Planning with LXA/LXC5.3 Technical data5.3.18 Connection units for non-Siemens distribution boardsThe required conductor cross sections for bare copper bars for connection to connectionunits for non-Siemens distribution boards.SystemIe [A]Number ... Cu barwidth x thickness1 2 3 4Compatible LXA/LXC systemLXC01.. 1000 (800) 1) 60 x 10 30 x 10 20 x 10 - LXA01.. and LXC01..LXC02.. 1250 (1000) 1) 80 x 10 40 x 10 30 x 10 - LXA02.. and LXC02..LXC03.. 1400 100 x 10 50 x 10 30 x 10 - LXC03..LXC04.. 1600 (1250) 1) 100 x 10 60 x 10 30 x 10 - LXA04.. and LXC04..LXA05.. 1600 100 x 10 60 x 10 30 x 10 - LXA05..LXC05.. 2000 160 x 10 80 x 10 50 x 10 - LXC05..LXC06.. 2500 (2000) 1) 200 x 10 100 x 10 60 x 10 50 x 10 LXC06.. and LXA06..LXC07.. 3200 (2500) 1) - 160 x 10 100 x 10 80 x 10 LXC07.. and LXA07..LXC08.. 4000 (3200) 1) - 200 x 10 120 x 10 100 x 10 2) LXC08.. and LXA08..LXC09.. 5000 (4000) 1) - - 200 x 10 160 x 10 LXC09.. and LXA09..LXA10.. 4500 - - 160 x 10 120 x 10 LXA10..1) Connection to LXA systems.2) In accordance with DIN 43671, Table 1, the maximum continuous current for this copper cross section is 3980 A.5.3.19 Tap-off unitsStandards and regulations DIN EN 60439-1/VDE 0660-500DIN EN 60439-2/VDE 0660-502Resistance to extreme climates Damp heat, constant, acc. to IEC 60068-2-78Damp heat, cyclic, acc. to IEC 60068-2-30Ambient temperature °C –5/+40/+35 (min./max./24-hour average)Degree of protectionIP54Trunking unit materialSheet steel, paintedColour of tap-off unitsRAL 7035 (light grey)Dimensions➜ Dimension drawings sectionRated insulating voltage Ui V~V~Overvoltage category/pollution degreeRated operating voltage Ue V~ 400Rated frequency Hz 50690800III/3 acc. to DIN EN 60947-1/VDE 0660-100Planning with SIVACON 8 PSPlanning Manual, 10/2007, A5E01541101-01 199