TRITON - Web Security Help, Version 7.7 - Websense

Web Security Server AdministrationStep 3: Verify the Log Database connectionUse the Windows ODBC Data Source Administrator on the Policy Server machine toverify the ODBC connection to the Log Database.1. Go to Start > Settings > Control Panel > Administrative Tools > Data Sources(ODBC).2. On the System DSN tab, select the appropriate data source name (by default,wslogdb70), and then click Configure.3. Verify that the correct database server machine is selected, and then click Next.4. Enter the credentials used to connect to the database, and then click Next.5. Accept the defaults on the next 2 screens, and then click Test Data Source.NoteIf the test fails, check the database server machine nameand try again.If the machine name is correct, but the test continues tofail, verify that the correct connection port is being used,and that the firewall allows communication on the selectedport.Step 4: Restart Websense services1. Reboot the Policy Server machine. Make sure that all Websense services on themachine restart normally.2. If the TRITON - Web Security used to configure this Policy Server is installed onanother machine, restart the Websense Web Reporting Tools and WebsenseTRITON - Web Security services on that machine.NoteIf TRITON - Web Security is installed on the samemachine as Policy Server, administrators must use the newIP address to log on.TRITON - Web Security Help 375