TRITON - Web Security Help, Version 7.7 - Websense

Network ConfigurationUse the Local Settings > NIC Configuration > Monitor List page to specify whichIP addresses Network Agent monitors via the selected network interface card (NIC).1. Under Monitor List, specify which requests Network Agent monitors:• All: Network Agent monitors requests from all IP addresses it sees using theselected NIC. Typically, this includes all machines in the same networksegment as the current Network Agent machine or NIC.• None: Network Agent does not monitor any requests.• Specific: Network Agent monitors only the network segments included in theMonitor List.2. If you selected Specific, click Add, and then specify the IP addresses thatNetwork Agent should monitor in IPv4 or IPv6 format. See Adding or editing IPaddresses, page 445, for more information.NoteYou cannot enter overlapping IP address ranges. If rangesoverlap, network bandwidth measurements may not beaccurate, and bandwidth-based filtering may not beapplied correctly.To remove an IP address or network range from the list, check the appropriate listitem, and then click Delete.3. Under Monitor List Exceptions, identify any internal machines Network Agentshould exclude from monitoring.For example, Network Agent could ignore requests made by CPM Server. Thisway, CPM Server requests will not clutter Websense log data or any of the statusmonitors output.a. To identify a machine, click Add, and then enter its IP address in IPv4 or IPv6format.b. Repeat the process to identify additional machines.4. Click OK to cache your changes and return to the NIC Configuration page.Changes are not implemented until you click Save and Deploy.Adding or editing IP addressesTRITON - Web Security Help | Web Security Solutions | Version 7.7.xRelated topics: Configuring global settings, page 440 Configuring local settings, page 442 Configuring NIC settings, page 443TRITON - Web Security Help 445