TRITON - Web Security Help, Version 7.7 - Websense

Network ConfigurationBy default the Ports used for HTTP traffic are 8080, 80 (when Websensesoftware is integrated with a firewall, proxy, or cache) or All (in a standalonedeployment).You want Network Agent to ignore traffic on specific ports.Mark Configure this Network Agent instance to ignore traffic on thefollowing ports, and then enter one or more ports.If you have deployed Websense Content Gateway, this may be used to preventdouble logging of HTTPS traffic.Websense Technical Support instructs you to change debugging options fortroubleshooting purposes.Debug Settings options should not be changed without direction from TechnicalSupport.FieldDescriptionMode • None (default)• General• Error• Detail• BandwidthOutput • File (default)• WindowPort55870 (default)When you are finished making changes to your Network Agent settings, click OK tocache the changes. Changes are not implemented until you click Save and Deploy.Configuring NIC settingsTRITON - Web Security Help | Web Security Solutions | Version 7.7.xRelated topics: Network Agent configuration, page 440 Configuring monitoring settings for a NIC, page 444 Adding or editing IP addresses, page 445Use the Network Agent > Local Settings > NIC Configuration page to specify howNetwork Agent uses each available network interface card (NIC) to monitor andmanage network usage.The NIC Information area provides the context for the changes that you make,showing the IP address, brief NIC Description, and card Name. Use this informationto ensure that you are configuring the correct NIC.TRITON - Web Security Help 443