SolarEdge
SolarEdge Installation Guide â MAN-01-00057-2.3
SolarEdge Installation Guide â MAN-01-00057-2.3
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Mounting the Inverter<br />
Figure 9: Hanging the inverter on the bracket - Type 2<br />
5. For inverters with DC Safety Unit - Optionally, secure the Safety Switch bracket to the<br />
wall:<br />
• Mark the location of the bracket screw for the Safety Switch and drill the hole.<br />
Figure 10: Safety Switch bracket<br />
• Fasten the bracket using a standard bolt.<br />
Verify that the bracket is firmly attached to the mounting surface.<br />
6. Insert the two supplied screws through the outer heat sink fin on both sides of the inverter<br />
and into the bracket. Tighten the screws with a torque of 4.0 N*m / 2.9 lb.*ft.<br />
Figure 11: Inserting the bracket screws<br />
24<br />
<strong>SolarEdge</strong>-Installation Guide MAN-01-00057-3.1