SolarEdge
SolarEdge Installation Guide â MAN-01-00057-2.3
SolarEdge Installation Guide â MAN-01-00057-2.3
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Creating an RS485 Bus Connection<br />
6. For creating an RS485 bus - connect all B, A and G pins in all inverters. The following<br />
figure shows this connection schema:<br />
NOTE<br />
Figure 26: Connecting the inverters in a chain<br />
Do not cross-connect B, A and G wires. Do not insert wires into RS485- 2 pins.<br />
7. Tighten the terminal block screws.<br />
8. Check that the wires are fully inserted and cannot be pulled out easily.<br />
9. Push the RS485 terminal block firmly all the way into the connector on the right side of<br />
the communication board.<br />
62<br />
<strong>SolarEdge</strong>-Installation Guide MAN-01-00057-3.1