SolarEdge
SolarEdge Installation Guide â MAN-01-00057-2.3
SolarEdge Installation Guide â MAN-01-00057-2.3
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Connecting the AC Grid to the Inverter<br />
3. Strip 58 mm / 2.32'' of the external cable insulation and strip 8 mm / 0.32'' of the internal<br />
wire insulation.<br />
Figure 12: Insulation stripping – AC (3-wire cable)<br />
4. Open the AC cable gland and insert the cable through the gland (see Figure 3).<br />
WARNING!<br />
Turn OFF the AC before connecting the AC terminals. If connecting equipment<br />
grounding wire, connect it before connecting the AC Line and Neutral wires.<br />
5. Depending on the inverter type (single phase or three phase), connect the AC, as follows.<br />
Connect the PE (grounding) wire first.<br />
Single Phase Inverter<br />
Wire type<br />
Connect to terminal<br />
Protective Earth PE<br />
Line L<br />
Neutral N<br />
Figure 13: Single Phase Inverter AC<br />
Terminals<br />
26<br />
<strong>SolarEdge</strong>-Installation Guide MAN-01-00057-3.1
Change language