Basic Characteristics RAPID

Examples
Structure
CONST jointtarget calib_pos := [ [ 0, 0, 0, 0, 0, 0], [ 0, 9E9, 9E9, 9E9, 9E9, 9E9] ];
The normal calibration position for IRB2400 is defined in calib_pos by the data
type jointtarget. The normal calibration position 0 (degrees or mm) is also
defined for the external logical axis a. The external axes b to f are undefined.
< dataobject of jointtarget >
< robax of robjoint >
< rax_1 of num >
< rax_2 of num >
< rax_3 of num >
< rax_4 of num >
< rax_5 of num >
< rax_6 of num >
< extax of extjoint >
< eax_a of num >
< eax_b of num >
< eax_c of num >
< eax_d of num >
< eax_e of num >
< eax_f of num >
Related information
Described in:
Move to joint position Instructions - MoveAbsJ
Positioning instructions RAPID Summary - Motion
Configuration of external axes User’s Guide - System Parameters
7-jointtarget-2 RAPID Reference Manual