Basic Characteristics RAPID

Examples
Syntax
MoveL *, v2000 \V:=2200, z40 \Z:=45, grip3;
The TCP of the tool, grip3, is moved linearly to a position stored in the instruction.
The movement is carried out with data set to v2000 and z40; the velocity
and zone size of the TCP are 2200 mm/s and 45 mm respectively.
MoveL \Conc, *, v2000, z40, grip3;
The TCP of the tool, grip3, is moved linearly to a position stored in the instruction.
Subsequent logical instructions are executed while the robot moves.
MoveL start, v2000, z40, grip3 \WObj:=fixture;
The TCP of the tool, grip3, is moved linearly to a position, start. This position is
specified in the object coordinate system for fixture.
MoveL
[ ’\’ Conc ’,’ ]
[ ToPoint ’:=’ ] < expression (IN) of robtarget > ’,’
[ Speed ’:=’ ] < expression (IN) of speeddata >
[ ’\’ V ’:=’ < expression (IN) of num > ]
| [ ’\’ T ’:=’ < expression (IN) of num > ] ’,’
[Zone ’:=’ ] < expression (IN) of zonedata >
[ ’\’ Z ’:=’ < expression (IN) of num > ] ’,’
[ Tool ’:=’ ] < persistent (PERS) of tooldata >
[ ’\’ WObj ’:=’ < persistent (PERS) of wobjdata > ] ’;’
Related information
Described in:
Other positioning instructions RAPID Summary - Motion
Definition of velocity Data Types - speeddata
Definition of zone data Data Types - zonedata
Definition of tools Data Types - tooldata
Definition of work objects Data Types - wobjdata
Motion in general Motion and I/O Principles
Coordinate systems Motion and I/O Principles -
Coordinate Systems
Concurrent program execution Motion and I/O Principles -
Synchronisation Using Logical
Instructions
RAPID Reference Manual 8-MoveL-3