Basic Characteristics RAPID

CRobT Reads the current position (robtarget) data
Example
CRobT (Current Robot Target) is used to read the current position of the robot and
external axes.
This function returns a robtarget value with position (x, y, z), orientation (q1 ... q4),
robot axes configuration and external axes position. If only the x, y, and z values of the
robot TCP (pos) are to be read, use the function CPos instead.
VAR robtarget p1;
p1 := CRobT(\Tool:=tool1 \WObj:=wobj0);
The current position of the robot and external axes is stored in p1. The tool tool1
and work object wobj0 are used for calculating the position.
Return value Data type: robtarget
Arguments
The current position of the robot and external axes in the outermost coordinate system,
taking the specified tool, work object and active ProgDisp/ExtOffs coordinate system
into consideration.
CRobT ([\Tool] [\WObj])
[\Tool] Data type: tooldata
The tool used for calculation of the current robot position.
If this argument is omitted the current active tool is used.
[\WObj] (Work Object) Data type: wobjdata
The work object (coordinate system) to which the current robot position returned
by the function is related.
If this argument is omitted the current active work object is used.
When programming, it is very sensible to always specify arguments \Tool and \WObj.
The function will always then return the wanted position, although some other tool or
work object has been activated manually.
RAPID Reference Manual 9-CRobT-1