Basic Characteristics RAPID

Examples
Syntax
MoveJ *, v2000\V:=2200, z40 \Z:=45, grip3;
The TCP of the tool, grip3, is moved along a non-linear path to a position stored
in the instruction. The movement is carried out with data set to v2000 and z40;
the velocity and zone size of the TCP are 2200 mm/s and 45 mm respectively.
MoveJ \Conc, *, v2000, z40, grip3;
The TCP of the tool, grip3, is moved along a non-linear path to a position stored
in the instruction. Subsequent logical instructions are executed while the robot
moves.
MoveJ start, v2000, z40, grip3 \WObj:=fixture;
The TCP of the tool, grip3, is moved along a non-linear path to a position, start.
This position is specified in the object coordinate system for fixture.
MoveJ
[ ’\’ Conc ’,’ ]
[ ToPoint ’:=’ ] < expression (IN) of robtarget > ’,’
[ Speed ’:=’ ] < expression (IN) of speeddata >
[ ’\’ V ’:=’ < expression (IN) of num > ]
| [ ’\’ T ’:=’ < expression (IN) of num > ] ’,’
[Zone ’:=’ ] < expression (IN) of zonedata >
[ ’\’ Z ‘:=’ < expression (IN) of num > ] ’,’
[ Tool ’:=’ ] < persistent (PERS) of tooldata >
[ ’\’ WObj ’:=’ < persistent (PERS) of wobjdata > ] ’;’
Related information
Described in:
Other positioning instructions RAPID Summary - Motion
Definition of velocity Data Types - speeddata
Definition of zone data Data Types - zonedata
Definition of tools Data Types - tooldata
Definition of work objects Data Types - wobjdata
Motion in general Motion and I/O Principles
Coordinate systems Motion and I/O Principles -
Coordinate Systems
Concurrent program execution Motion and I/O Principles -
Synchronisation Using Logical Instructions
RAPID Reference Manual 8-MoveJ-3