283757893275

More documents

Recommendations

Info

218 Barry’s Advanced Construction of Buildings 150 girth ridge cap Galvanised or plastisol corrugated steel sheeting hook bolted to purlins Ventilated air space between sheets and insulation 150 Gutter bolted to wall sheets Wall sheeting and insulation over sheeting rails Angle purlin fixed to angle cleat Line of top of lattice roof truss Over purlin insulation boards with timber spacers to provide air space 8 , 10 ,11 and 12 corrugations, 610 762 , 838 and 914 cover width 19 Standard 3 corrugated steel cladding sheet Figure 4.52 Corrugated steel cladding sheets. Over purlin insulation with inner lining Where mineral fibre mat insulation is used and where more rigid forms of insulation will not be self-supporting between widely spaced purlins, it is necessary to use profiled inner lining sheets (or trays) to provide support for the insulation. The lining sheets also help to provide a more attractive finish to the interior. Linings are cold, roll-formed, steel strips with shallow depth profiles adequate to support the weight of the insulation. The sheets are hot dip galvanised and coated with a protective and decorative organic plastic coating. To prevent compression of the loose mat or quilt, its thickness is maintained by Zed section spacers fixed between cladding and lining panels as illustrated in Figure 4.53 and Figure 4.54. The space between the top of the sheeting and the insulation is passively ventilated to minimise condensation, and a breather paper is usually spread over the top of the insulation. The breather paper protects the insulation from any rain or water condensate, yet allows moisture vapour to penetrate it. Some manufacturers also manufacture ‘structural’ trays, which provide a stronger internal lining and thus help to improve security to the roof. Over purlin composite (site assembled) This system comprises a core of rigid preformed lightweight insulation (or mineral wool and spacer), shaped to match the profile of the sheet and the inner lining tray. The separate components are assembled on site and fixed directly to purlins and lining sheets with self-tapping screws (Photograph 4.6). Side and end laps are sealed against the penetration of moisture vapour. Factory-formed composite panels have largely replaced this system.
Side lap of sheeting Sheeting screwed to spacer 150 end lap of profiled sheets Mineral fibre insulation Mineral fibre quilt laid on galvanised profiled steel lining sheets Galvanised steel spacer screwed through plastic ferrule to purlin Zed purlin Figure 4.53 Over purlin insulation with inner lining sheets. Eaves closer Insulation sheet Inner lining sheet Self-drilling self tapping screw Roof sheeting Ridge closer Filler block Ridge cap Zed section purlins Line of top of steel portal frame Ridge closer Wall cladding Trapezoid profile coated steel roof cladding sheet Pre-formed foam insulation board to fit profile of outer and inner sheets Eaves closer Trapezoid profile coated steel inner lining sheet Figure 4.54 Profiled steel cladding, insulation and inner lining sheets.
Page 3:
BARRY’S ADVANCED CONSTRUCTION OF
Page 6 and 7:
This edition first published 2014 T
Page 8 and 9:
vi Contents 6 Structural Concrete F
Page 10 and 11:
Acknowledgements Over the years our
Page 13 and 14:
1 Introduction In Barry’s Introdu
Page 15 and 16:
Introduction 3 Photograph 1.1 Frame
Page 17 and 18:
Introduction 5 (2) Positional toler
Page 19 and 20:
Introduction 7 some of the factors
Page 21 and 22:
Introduction 9 Photograph 1.2 Artif
Page 23 and 24:
Introduction 11 on legislation, oth
Page 25 and 26:
Introduction 13 allow for innovatio
Page 27 and 28:
2 Scaffolding, Façade Retention an
Page 29 and 30:
Scaffolding, Façade Retention and
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
3 Ground Stability, Foundations and
Page 81 and 82:
Ground Stability, Foundations and S
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Where the ground is susceptible to
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
Page 105 and 106:
Heavy pad reinforcement Reinforceme
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
Page 113 and 114:
Page 115 and 116:
Page 117 and 118:
Photograph 3.3 Driven precast concr
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
(a) (b) Photograph 3.6 (a) A drop a
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146:
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Working direction Hopper and cellul
Page 153 and 154:
Infill concrete packing applies pre
Page 155 and 156:
Reinforced structural concrete base
Page 157 and 158:
Page 159 and 160:
Page 161 and 162:
Page 163 and 164:
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
4 Single-Storey Frames, Shells and
Page 177 and 178:
Single-Storey Frames, Shells and Li
Page 179 and 180: Single-Storey Frames, Shells and Li
Page 193 and 194: Portal rafter Plate welded to rafte
Page 199 and 200: Zed purlins Washer plate bolted to
Page 201 and 202: Sheeting rails for cladding Steel r
Page 215 and 216: Photograph 4.12 Lattice column to b
Page 229: Single-Storey Frames, Shells and Li
Page 281 and 282:
Outline of straight line limited hy
Page 283 and 284:
Single-Storey Frames, Shells and Li
Page 285 and 286:
5 Structural Steel Frames Structura
Page 287 and 288:
Structural Steel Frames 275 penetra
Page 289 and 290:
Structural Steel Frames 277 calcula
Page 291 and 292:
Structural Steel Frames 279 The lim
Page 293 and 294:
Structural Steel Frames 281 420.5-
Page 295 and 296:
Structural Steel Frames 283 no stro
Page 297 and 298:
Structural Steel Frames 285 Channel
Page 299 and 300:
One-way span floor and roof slabs R
Page 301 and 302:
Structural Steel Frames 289 A disad
Page 303 and 304:
Structural Steel Frames 291 Rib bea
Page 305 and 306:
Structural Steel Frames 293 Timber
Page 307 and 308:
Structural Steel Frames 295 Horizon
Page 309 and 310:
Structural Steel Frames 297 Concret
Page 311 and 312:
Beam End plate welded to beam Colum
Page 313 and 314:
Structural Steel Frames 301 Cap pla
Page 315 and 316:
Structural Steel Frames 303 Bearing
Page 317 and 318:
Structural Steel Frames 305 Bolt fa
Page 319 and 320:
Structural Steel Frames 307 Electro
Page 321 and 322:
Structural Steel Frames 309 Types o
Page 323 and 324:
Structural Steel Frames 311 Weld fa
Page 325 and 326:
Structural Steel Frames 313 beam en
Page 327 and 328:
Structural Steel Frames 315 Column
Page 329 and 330:
A timber profile is cut to the same
Page 331 and 332:
Structural Steel Frames 319 Square
Page 333 and 334:
Structural Steel Frames 321 for a s
Page 335 and 336:
Structural Steel Frames 323 Photogr
Page 337 and 338:
Page 339 and 340:
Structural Steel Frames 327 Column
Page 341 and 342:
Structural Steel Frames 329 Strengt
Page 343 and 344:
Structural Steel Frames 331 Figure
Page 345 and 346:
Structural Steel Frames 333 Floor b
Page 347 and 348:
Structural Steel Frames 335 50 or 7
Page 349 and 350:
Page 351 and 352:
Structural Steel Frames 339 rating,
Page 353 and 354:
Structural Steel Frames 341 The adv
Page 355 and 356:
Structural Steel Frames 343 Shear s
Page 357 and 358:
Structural Concrete Frames 345 ❏
Page 359 and 360:
Structural Concrete Frames 347 Work
Page 361 and 362:
Structural Concrete Frames 349 6.2
Page 363 and 364:
Structural Concrete Frames 351 is o
Page 365 and 366:
Structural Concrete Frames 353 plac
Page 367 and 368:
Structural Concrete Frames 355 Comp
Page 369 and 370:
Structural Concrete Frames 357 Beam
Page 371 and 372:
Structural Concrete Frames 359 cant
Page 373 and 374:
Structural Concrete Frames 361 Clos
Page 375 and 376:
Structural Concrete Frames 363 Rein
Page 377 and 378:
Structural Concrete Frames 365 Stee
Page 379 and 380:
Structural Concrete Frames 367 Sold
Page 381 and 382:
Structural Concrete Frames 369 Hand
Page 383 and 384:
Structural Concrete Frames 371 Conc
Page 385 and 386:
Structural Concrete Frames 373 Edge
Page 387 and 388:
Figure 6.23 Prop and deck floor pos
Page 389 and 390:
Structural Concrete Frames 377 Main
Page 391 and 392:
Structural Concrete Frames 379 Edge
Page 393 and 394:
Handrail protects workers when pour
Page 395 and 396:
Structural Concrete Frames 383 calc
Page 397 and 398:
Structural Concrete Frames 385 Wire
Page 399 and 400:
Structural Concrete Frames 387 Thru
Page 401 and 402:
Structural Concrete Frames 389 ❏
Page 403 and 404:
Structural Concrete Frames 391 Expo
Page 405 and 406:
Structural Concrete Frames 393 Balc
Page 407 and 408:
Structural Concrete Frames 395 In s
Page 409 and 410:
Page 411 and 412:
Page 413 and 414:
Structural Concrete Frames 401 comp
Page 415 and 416:
Structural Concrete Frames 403 Stee
Page 417 and 418:
Structural Concrete Frames 405 The
Page 419 and 420:
Structural Concrete Frames 407 Wrap
Page 421 and 422:
Structural Concrete Frames 409 alte
Page 423 and 424:
7 Cladding and Curtain Wall Constru
Page 425 and 426:
Cladding and Curtain Wall Construct
Page 427 and 428:
Page 429 and 430:
Page 431 and 432:
Page 433 and 434:
Page 435 and 436:
Page 437 and 438:
Page 439 and 440:
Page 441 and 442:
Stainless steel restraint cramps fi
Page 443 and 444:
Page 445 and 446:
Page 447 and 448:
Page 449 and 450:
Page 451 and 452:
Page 453 and 454:
Page 455 and 456:
Page 457 and 458:
Page 459 and 460:
15 mm Cladding and Curtain Wall Con
Page 461 and 462:
Page 463 and 464:
Page 465 and 466:
Page 467 and 468:
Page 469 and 470:
Page 471 and 472:
Page 473 and 474:
Page 475 and 476:
Page 477 and 478:
Page 479 and 480:
Page 481 and 482:
Page 483 and 484:
Page 485 and 486:
Page 487 and 488:
Page 489 and 490:
Page 491 and 492:
Page 493 and 494:
Page 495 and 496:
Page 497 and 498:
Roof support Roof or eaves level La
Page 499 and 500:
Page 501 and 502:
Prefabrication and Off-Site Product
Page 503 and 504:
Page 505 and 506:
Page 507 and 508:
Page 509 and 510:
Page 511 and 512:
The finished hospital looks no diff
Page 513 and 514:
Page 515 and 516:
Page 517 and 518:
Page 519 and 520:
Page 521 and 522:
Page 523 and 524:
Page 525 and 526:
Page 527 and 528:
Lifts and Escalators 515 ❏ ❏
Page 529 and 530:
Lifts and Escalators 517 will be bu
Page 531 and 532:
Lifts and Escalators 519 hydraulic
Page 533 and 534:
Lifts and Escalators 521 ❏ ❏
Page 535 and 536:
Lifts and Escalators 523 FFL Lift c
Page 537 and 538:
Lifts and Escalators 525 Climbing f
Page 539 and 540:
Lifts and Escalators 527 Above 30 m
Page 541 and 542:
Lifts and Escalators 529 Photograph
Page 543 and 544:
Fit Out and Second Fix 531 cabinets
Page 545 and 546:
Fit Out and Second Fix 533 ❏ ❏
Page 547 and 548:
Fit Out and Second Fix 535 Four-way
Page 549 and 550:
Fit Out and Second Fix 537 Services
Page 551 and 552:
Fit Out and Second Fix 539 Wire han
Page 553 and 554:
Fit Out and Second Fix 541 tiles ar
Page 555 and 556:
Fit Out and Second Fix 543 Metal st
Page 557 and 558:
Fit Out and Second Fix 545 Multiple
Page 559 and 560:
11 Building Obsolescence and Revita
Page 561 and 562:
Building Obsolescence and Revitalis
Page 563 and 564:
Page 565 and 566:
Page 567 and 568:
Page 569 and 570:
Page 571 and 572:
Page 573 and 574:
Page 575 and 576:
Appendix B: Additional References C
Page 577 and 578:
Index Access from heights, 42 Acces
Page 579 and 580:
Index 567 Innovation, 505 Inspectio
Page 581:
Index 569 Suspended frameless glazi
show all

283757893275

Create successful ePaper yourself

Delete template?

Save as template?