Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

When the Smart Tool is active, the position of the cursor in relation to a clip
or note determines how the tool functions.
To use the Smart Tool as a Selector, position the tool over the middle of an
audio clip, in the upper half. To use it as a Grabber, position it in the lower
half. For the Trim tool, position the Smart Tool near the clip’s start or end
point.
The Smart Tool can also be used to create fade-ins, fade-outs, and
crossfades.
The functions of the Smart Tool are covered in detail in the
Pro Tools 110 course.
Edit Mode Features
Pro Tools has four Edit modes: Shuffle, Spot, Slip, and Grid. The Edit mode
is selected by clicking the corresponding mode button on the left side of the
toolbar area in the Edit window.
Figure 2.32 Edit mode buttons
Source: Avid ® .
Shortcut: You can also use function keys F1 (Shuffle), F2 (Slip), F3
(Spot), and F4 (Grid) to set the Edit mode.
The Edit mode affects the movement and placement of audio clips, MIDI
clips and notes, and video clips. It also affects how commands such as Copy
and Paste function, as well as how the various Edit tools work (Trim,
Selector, Grabber, and Pencil).
Shuffle Mode