Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

Source: Avid ® .
3. Click the NUDGE VALUE pop-up selector again to choose a corresponding
Nudge size; the options available will vary depending on the Time Scale
selected in Step 2.
Figure 8.24 Selecting a Nudge size
Source: Avid ® .
Tip: The Follow Main Time Scale option at the bottom of the Nudge
Value pop-up menu enables the Nudge value to change automatically
whenever the Main Time Scale is changed, adopting the last used
value for that Time Scale. To maintain the Nudge in a Time Scale
that is different from your Main Time Scale, deselect this option.
Nudging Clips
To nudge a single clip or multiple clips, do the following:
1. Verify that the Nudge Time Scale and size have been set as desired. (See
the preceding “Configuring the Nudge Value” section.)
2. With the GRABBER tool, select the clip or clips you want to nudge.
3. On the numeric keypad, press the PLUS key [+] to move the clip(s) later
in the track or the MINUS key [–] to move the clip(s) earlier in the track.
The clips will move incrementally by the Nudge value.