Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

Source: Avid ®
5. Choose EDIT > FADES > CREATE to open the Fades dialog box.
6. Click OK to accept the default fade shape; then press ENTER (Windows)
or RETURN (Mac) to deselect the fade and return the insertion point to the
song start.
To remove silence before the guitar pattern:
1. Click on the SHUFFLE mode button on the left side of the toolbar to place
the session into Shuffle mode.
2. Select the Guitar track by clicking on its nameplate.
3. While holding SHIFT, recall the Guitar Start memory location by clicking
on it in the Markers ruler. The area from the song start to the Guitar Start
memory location will be selected.
4. Press BACKSPACE (Windows) or DELETE (Mac) to clear the selected
audio. The remaining audio will shuffle over, leaving no blank space on
the track.
To extend the guitar pattern:
1. Place the session back into Grid mode.
2. Using the SELECTOR tool, make a selection on the Guitar track from
3|1|000 to 5|1|000.
3. Choose EDIT > REPEAT to open the Repeat dialog box.
4. Enter 2 for the Number of Repeats and click OK. The selection will be
duplicated two times, and two new clips will appear selected on the
track.
5. Using the GRABBER tool, select the excess clip at the end of the Guitar
track; then clear the selection by pressing BACKSPACE (Windows) or
DELETE (Mac).
6. Using the TRIM tool, extend the end of the last remaining clip on the
Guitar track by one bar so that it ends with the DrumLoop clip. (Click