Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

Velocity controller lane for the track by clicking the Show/Hide Lanes
button [triangle] at the head of the track.)
Figure PR1.15 Track View selector on the SynthBass track
Source: Avid ®
The Velocity view displays velocity stalks associated with each MIDI note,
representing the velocity value for that note. (The longer the stalk, the higher
the velocity value.)
Edit the velocities for the first clip:
1. Enable Loop Playback mode by choosing OPTIONS > LOOP PLAYBACK.
2. Press the SPACE BAR to play back the selection and allow it to continue
playing throughout this section.
3. Click the MIRRORED MIDI EDITING button at the top of the Edit window
to enable mirrored MIDI editing. The button will turn blue when active.
Figure PR1.16 Click the Mirrored MIDI Editing button to enable it.
Source: Avid ®
4. With the GRABBER tool, click any open area of the track to deselect all of
the notes in the clip.
5. With the GRABBER tool still active, click on the diamond at the top of the
second velocity stalk so that it becomes selected. The diamond will turn