Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

Add Sound Effects
The session is still missing some sound effects. During this part of the
project, you will use various editing techniques to add the missing material.
Refer to Lesson 6 as needed for details on editing techniques.
Add Wind
The first sound effect that you will add occurs at the point in the movie when
the squire walks through the castle. You will need to add the sound of wind
to match the action using the Wind02 sound effect in your Clip List.
Place the Wind02 clip onto the FX 01 track and spot it to the proper
location:
1. Identify the FX 01 track on screen and make sure it is visible.
2. Select the WIND 02 clip in the Clip List (Edit window). If necessary, use
the scroll bar to scroll the list until the clip is visible.
3. Drag the WIND 02 clip from the Clip List to any open space on the FX
01 track.
4. Click the SPOT button in the upper-left corner of the Edit window to
activate Spot mode. (You might have to reposition the Video window
first.)
5. With the GRABBER tool, click on the clip that you just placed on the FX 01
track. The Spot dialog box will open.
Figure PR2.12 The Spot dialog box