Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

Source: Avid ® .
8. Allow recording to continue until playback stops automatically (if
recording from a selection) or until you reach the desired end point. To
stop the recording manually, click the STOP button in the Transport
window or press the SPACE BAR.
Tip: After the recording is complete, you should see the waveform for
your combined source tracks on the destination tracks. If no
waveform is present, check the settings for your source outputs and
record inputs and verify that the faders are set to an audible level.
9. Disarm the record-enabled track and rename the recorded clip, if
desired.
Once you have combined multiple tracks into a single stereo track, you can
continue with more recording or editing, using the stereo track in place of any