Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

▪ POW-r Dither. An advanced type of dither providing optimal bit-depth
reduction for critical mixdown and mastering tasks.
▪ Recti-Fi. Provides additive harmonic processing effects through
waveform rectification; includes subharmonic synthesizer, full wave
rectifier, pre-filter for adjusting effect frequency, and post-filter for
smoothing generated waveforms.
▪ ReWire. Provides real-time audio and MIDI streaming between Pro
Tools and ReWire client applications, with sample-accurate
synchronization and transport control.
▪ Sci-Fi. Provides analog synthesizer-type effects, including ring
modulation; frequency modulation; variable-frequency, positive and
negative resonator; and modulation control by LFO, envelope follower,
sample-and-hold, or trigger-and-hold.
▪ Signal Generator. Produces audio test tones in a variety of frequencies,
waveforms, and amplitudes, such as reference signals for calibration.
▪ TimeAdjuster. Provides compensation for delays due to DSP or Native
routing; also provides gain compensation (+/– 24 dB) and phase
inversion for correcting out-of-phase signals.
▪ Trim. Can be used to attenuate an audio signal from –infinity to +6 dB or
+12 dB; a multi-mono Trim plug-in provides muting control over
individual channels of a multi-channel track.
The following AudioSuite-only plug-ins are installed with Pro Tools 11:
▪ DC Offset Removal. Removes DC offset (a type of audio artifact) from
audio files to prevent pops and clicks in edited material.
▪ Duplicate. Duplicates the selected audio in place, creating a new,
continuous audio file.
▪ Gain. Boosts or lowers a selected region’s amplitude by a specific
amount.
▪ Invert. Reverses the polarity of selected audio.
▪ Normalize. Optimizes the volume level of an audio selection to correct
low amplitude signals or inconsistent volume levels.
▪ Reverse. Replaces audio with a reversed version of the selection to
create a reverse envelope effect or backwards playback of a selection.