Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

enable metronome playback is to set up a click track for your session, as
described in Lesson 4.
To modify the click settings, choose SETUP > CLICK/COUNTOFF or doubleclick
the METRONOME button in the Edit or Transport window. Enter the
desired settings in the Click area of the Click/Countoff Options dialog box.
Figure 2.42 Click/Countoff Options dialog box
Source: Avid ® .
Tip: With the Numeric Keypad mode set to Transport (default), you can
press [7] to enable the click.
Tip: To set the mode for the numeric keypad, choose SETUP >
PREFERENCES > OPERATION. Select the desired mode under Numeric
Keypad in the Transport section.
Countoff Controls
When Count Off is selected (highlighted) in the MIDI controls section, Pro
Tools counts off a specified number of bars (measures) before playback or
recording begins. The number of bars used for Count Off is indicated in the
Count Off field.
To change the Count Off settings, choose SETUP > CLICK/COUNTOFF or
double-click the Count Off field in the Edit or Transport window. Enter the