Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

4. Make the MX Mix track inactive by right-clicking on the track nameplate
and selecting MAKE INACTIVE from the pop-up menu.
5. Press ENTER or RETURN to move the insertion point to the beginning of the
Timeline, followed by the SPACE BAR to play back the session with the
new music track.
6. At the end of the clip, press the SPACE BAR a second time to stop
playback.
Save Work in Progress
You have now completed the editing tasks for your project. You should take
this opportunity to save your work.
Save your work:
1. Choose FILE > SAVE to save your progress up to this point.
Mixing in Pro Tools
Now that all of the editing is complete, you will use some of the mixing
features in Pro Tools to add some real-time processing and blend all of the
sound elements together.
Remove the Hum
The Squire 01 clip on the DX 03 track contains a low-frequency hum that you
will now need to remove. Using some creative EQ, you can eliminate most of
the hum. To do so, you will need to locate and zoom in on the clip, insert an
EQ plug-in on the track, and selectively adjust the EQ settings.
Locate and zoom in on the Squire 01 clip:
1. Click on the SQUIRE 01 clip in the Clip List to select the clip on the
Track Playlist. If necessary, scroll the Clip List until the clip is visible
(toward the bottom).
Figure PR2.14 Clicking on the clip in the Clip List to select it