Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

Tip: If you are using a laptop computer that does not have a numeric
keypad, you can use the Function key (marked Fn) and the
corresponding +/– keys to nudge clips.
Shortcut: You can manually enter a Nudge value by typing it directly
into the Nudge display.
Nudging Selections
In addition to nudging clips, you can also nudge selections using the PLUS
[+] and MINUS [–] keys on the numeric keypad.
To nudge a selection, do the following:
1. Make a selection on any track or tracks that does not encompass an entire
clip.
2. On the numeric keypad, press the PLUS key [+] to move the selection
later or the MINUS key [–] to move the selection earlier. The selection
will move incrementally by the Nudge value.
Or
1. Make a selection on any track or tracks that includes one or more entire
clips.
2. Hold the SHIFT key.
3. On the numeric keypad, press the PLUS key [+] to move the selection
later or the MINUS key [–] to move the selection earlier. The selection
will move incrementally by the Nudge value without affecting the
underlying clips.
Adding the Shift Key to Freely Nudge any Selection
When a selection encompasses one or more entire clips, nudging will cause
the underlying clip(s) to move with the selection. By holding Shift while
nudging, you can nudge the selection independently, without affecting the
underlying clip(s).
Creating Fade Effects