Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

Point at that spot.
6. Press E on your keyboard to deactivate Zoom Toggle, returning the
session to the previous view.
Having identified a Sync Point in the sound effect clip, you will now need to
determine the corresponding point in the movie and spot the sound effect to
that point.
Spot the Drumstick Drop sound effect to the movie:
1. With the SCRUBBER tool selected, click and drag on the Video track to
locate the point when the drumstick hits the plate. The impact should
occur somewhere between 0:13.200 and 0:13.500 (Min:Sec). Take note
of the exact time location shown in the Main Counter.
2. Click the SPOT button in the Edit window to activate Spot mode.
3. With the GRABBER tool, click on the DRUMSTICK DROP clip on the FX 05
track. The Spot dialog box will appear.
4. In the Sync Point field, type the time that you noted in Step 1. Be sure to
use the same Time Scale in this dialog box as displayed in the Main
Counter (Min:Sec).
5. Click OK. The clip’s Sync Point will be spotted to the point where the
drumstick hits the plate.
6. Click the SLIP button to return to Slip mode.
Audition the sound effect:
1. Using the SELECTOR tool, place the insertion point somewhere around
0:12.000.
2. Press the SPACE BAR to play back the sound effect with the picture.
3. When finished, press the SPACE BAR again to stop playback.
4. Press ENTER (Windows) or RETURN (Mac) to return to the beginning of the
Timeline.