Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

desired settings in the Countoff area of the Click/Countoff Options dialog
box.
Tip: With the Numeric Keypad mode set to Transport, you can press [8]
to enable the countoff.
MIDI Merge Mode
When MIDI Merge is selected (MIDI Merge mode), recorded MIDI data will
be merged with existing track material, overdubbing the track. When
deselected (Replace mode), recorded MIDI data will replace existing track
material.
To engage MIDI Merge mode, click on the MIDI Merge button in the Edit or
Transport window. Click a second time to return to Replace mode.
Tip: With the Numeric Keypad mode set to Transport, you can press [9]
to enable MIDI Merge.
Tempo Ruler Enable
When selected, Pro Tools uses the tempo map defined in the Tempo Ruler to
control the tempo during playback and recording. When deselected, Pro
Tools switches to Manual Tempo mode and ignores the tempo map.
In Manual Tempo mode, the tempo can also be adjusted by typing a value
directly into the Tempo field or by tapping in a tempo (see “Tempo Field”
below).
Meter Display
The Meter display indicates the session’s current meter based on the play
location. Double-click the Meter display to open the Meter Change dialog
box.
Tempo Field
The Tempo field displays the session’s current tempo based on the play
location. In Manual Tempo mode, you can enter a BPM value directly into
this field. In addition, when the Tempo field is selected, you can tap in a
tempo from a MIDI controller or from the computer keyboard using the T key.