Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

2. Open the Memory Locations window (WINDOW > MEMORY LOCATIONS)
and click on VERSE 1 to place the insertion point at the beginning of the
first verse.
Tip: If needed, you can resize the Memory Locations window by
clicking on any window border and dragging with the double-headed
arrow.
3. Press the SPACE BAR to initiate playback.
4. In the 1-Band EQ III plug-in window, drag the gray ball to the left or
right until you hear the desired reduction in low frequencies when playing
back (try around 80 to 120 Hz).
5. Unsolo the E-Bass track and press the SPACE BAR to stop playback.
6. Close the EQ III plug-in window to reduce on-screen clutter.
Enhance the Guitar
In this part of the project, you will use the Eleven Free plug-in to add guitar
amp and speaker cabinet emulation to the Guitar track.
Insert the Eleven Free plug-in on the Guitar track:
1. Click on INSERT SELECTOR A of the Guitar track and choose PLUG-IN >
HARMONIC > ELEVEN FREE (MONO) from the pop-up menu. The Eleven
Free plug-in window will appear.
2. In the Eleven Free plug-in window, select the DC MODERN OVERDRIVE
amp and the 4X12 GREEN 25W cabinet by clicking on the AMP TYPE and
CABINET TYPE display screens, respectively, and selecting models for
each from the pop-up menus.
Figure PR1.23 Selecting an amp type in the Eleven Free plug-in