Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

set the incoming signal, do the following:
1. Locate the channel strip for the track you will record to in the Mix
window.
2. Verify that the input displayed on the Input Path selector matches the input
that your sound source is plugged into on your audio interface.
Figure 4.5 The Input Path selector in the Mix window
Source: Avid ® .
3. If necessary, click the INPUT PATH SELECTOR to make changes, selecting
the correct input path from the pop-up menu. (Note: Stereo tracks will
have a pair of inputs routed to the track.)
Figure 4.6 Input Path selector pop-up menu