Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

PROJECT 1
Music Hands-On Project
In this project, you will complete a one-minute song snippet. To complete
this project, you will add Audio and Instrument tracks, add drums using the
Xpand! 2 and Boom plug-ins, import audio and MIDI, and add loops and
effects processing to polish the mix.
Duration: 90 Minutes
Media: None Required
The media files for this project are provided courtesy of Eric Kuehnl of
Ballet Mechanique:
WRITTEN BY: Eric Kuehnl and Zack Vieira
PERFORMED AND PRODUCED BY: Ballet Mechanique ©2008
Note: The audio files provided for this project are strictly for use to
complete the exercises contained herein. No rights are granted to
use the files or any portion thereof in any commercial or noncommercial
production or performance.
Powering Up
To get started on this project, you will need to power up your system. It is
important to power up properly to avoid problems that could possibly
damage your equipment.
When using audio equipment, you should power up components in the order
that the audio signal flows through them. The general process for powering
up a Pro Tools 11.0 system is as follows (see your system documentation for
powering up a system with HD Native or HDX hardware):
1. Power up external hard drives, if used.
2. Verify connections and power up audio/MIDI interfaces.
3. Start the computer.