Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

Pro Tools creates new clips based on the selection start and end points. If the
ON GRID or AT TRANSIENTS option is chosen, Pro Tools will create
additional clips within the selection at each Grid line or transient point. Pro
Tools automatically names all resulting new clips by appending the next
available edit number to the end of the original clip name.
Tip: To have Pro Tools display the Name dialog box for new clips
created from a continuous selection, deselect the AUTO-NAME
SEPARATED CLIPS option in the Editing tab of the Pro Tools
Preferences.
The Heal Separation Command
If you’ve separated a clip and you later decide to undo the separation, you
can repair the separations and restore the original unedited material using the
Heal Separation command. The Heal Separation command gives you a way
to repair separated clips, provided that the clips are contiguous and their
relative start and end points haven’t changed since the separation.
To heal a separation between two or more contiguous clips, do the
following:
1. Create a selection across the separation points of the clips to repair.
Figure 8.14 Selecting across separation points
Source: Avid ® .
2. Choose EDIT > HEAL SEPARATION or press CTRL+H (Windows) or
COMMAND+H (Mac).
Figure 8.15 Selection after separations are healed