Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

4. If needed, use the HORIZONTAL ZOOM IN button (or another zoom
method) to zoom in sufficiently; you should be able to see where the
waveform changes shape with each syllable.
5. Using the SELECTOR tool, select the word “Time” in the second clip
(2|2|000 to 2|2|480).
6. Choose EDIT > CUT or press CTRL+X (Windows) or COMMAND+X (Mac).
The selected word will be removed and placed on your computer’s
Clipboard.
7. Place the insertion point at the second 1/8 note in Bar 4 (4|1|480) on the
Vox1 track and choose EDIT > PASTE. The word “Time” will be pasted
in as a new clip on the track.
Figure EX8.1 Arrangement of clips after editing the Vox1 track
Source: Avid ®
8. Press ENTER (Windows) or RETURN (Mac) followed by the SPACE BAR to
listen to your edits.
To arrange audio on the Vox2 track:
1. Unmute the Vox2 track and place the session into Spot mode.
2. With the GRABBER tool, click on the 10_03 clip on the Vox2 track to select
it. The Spot dialog box will open.
3. In the dialog box, enter 5|1|000 as the Start location for the clip and
click OK. The clip will move to start at Bar 5 and will remain selected.
Play through the selection to get familiar with the clip.
4. With the clip still selected, choose EDIT > COPY or press CTRL+C
(Windows) or COMMAND+C (Mac) to copy the clip to the Clipboard.
5. Using the Edit Selection Start field in the Edit window, enter a start time
of 7|1|000 and press ENTER to move the insertion point to that location.