Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

Gradually move the mouse back and forth while viewing the Video
window. Locate the point where the scene changes to the squire walking.
Release the mouse to position the insertion point at this spot.
5. Press D on your keyboard to create a fade-in.
6. With the SCRUBBER tool, click and drag near the end of the clip.
Gradually move the mouse back and forth while viewing the Video
window. Locate the point where the squire approaches the stairs before
the scene changes to the king’s throne room. Release the mouse to
position the insertion point at this spot.
7. Press G on your keyboard to create a fade-out.
8. Press E on your keyboard to deactivate Zoom Toggle, returning the
session to the previous view.
Add Drumstick Drop
The next sound effect you need to add is the Drumstick Drop. For this sound
effect, you will need to sync the impact point of the sound effect to the point
in the movie at which the drumstick hits the plate. To do this, you will use a
Sync Point.
Place the Drumstick Drop sound effect on the FX 05 track and identify a
Sync Point:
1. Identify the FX 05 track on screen and make sure it is visible.
2. Locate the DRUMSTICK DROP clip in the Clip List and drag it onto any
open space of the FX 05 track.
3. With the clip selected, press E on your keyboard to activate Zoom Toggle
and zoom in on the clip.
4. With the SCRUBBER tool, click and drag across the clip until you hear the
sound of the drumstick making impact. Release the mouse to position the
insertion point as close as possible to the beginning of the impact.
5. Choose CLIP > IDENTIFY SYNC POINT. A small triangle will appear
in the lower part of the clip, under the insertion cursor, signifying a Sync