Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

The wind you’ve added is a little longer than the scene to which it
corresponds. You will use this extra time before and after the scene to create
a fade-in and a fade-out effect.
Create a fade-in and a fade-out on the Wind02 clip:
1. If it is not already selected, click on the A...Z button in the Edit
window to enable Commands Keyboard Focus mode. The A...Z button
is located above the tracks display area on the right. When selected, the
button becomes highlighted in yellow.
Figure PR2.13 Clicking the Commands Keyboard Focus button
Source: Avid ®
Tip: Commands Keyboard Focus mode gives you access to many Pro
Tools commands at the touch of a single keystroke. Focus keys are
covered throughout the Avid Learning Series courses and are
summarized in the Pro Tools 310M and 310P books.
2. Using the GRABBER tool, click the Wind02 clip to select it.
3. Press E on your keyboard to activate Zoom Toggle. The selected clip
will expand to fill the available space in the Edit window.
4. With the SCRUBBER tool, click and drag near the start of the clip.