Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

Source: Avid ®
3. Click APPLY. Four bars will be inserted into the session.
4. Close the Time Operations window.
Edit the SynthLead track:
1. If necessary, scroll the Edit window so that the SynthLead track is
visible on screen.
2. Click the SPOT button in the upper-left corner of the Edit window to
activate Spot mode.
3. While holding down ALT (Windows) or OPTION (Mac), use the GRABBER
tool to click in the BigRiff_02 clip at the end of the track. The Spot dialog
box will open.
4. Set the Time Scale to BARS|BEATS, if needed.
5. In the Start field, type 1|1|000 and click OK. A copy of the clip will
move to the beginning of the session.
Figure PR1.21 The Spot dialog box