Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

Recommendations

Info

To select a different Patch preset, click the QUICK BROWSE menu and navigateto the desired folder and Patch. Each Patch calls up a preset Structure Freeconfiguration.Figure 6.22 Selecting a Patch from the Quick Browse menuSource: Avid ® and inMusic®.Additional Patches can be added to the preset using the Patch menu at the topof the Patch List. To add a Patch, select PATCH > ADD PATCH and navigateto the desired folder and Patch. To configure a new Patch to play backconcurrently with existing patches, set its MIDI channel correspondingly (toMIDI Channel A1, for example).Figure 6.23 Adding a Patch from the Patch menu
Source: Avid ® and inMusic®.Figure 6.24 Selecting a MIDI channel from the MIDI Channel selectorSource: Avid ® and inMusic®.Recording MIDIWith a MIDI controller connected to your Pro Tools system, the MIDI signalrouted to a MIDI-compatible track, and the track record-enabled, you are
Page 3 and 4:
PRO TOOLS ® 101:AN INTRODUCTION TO
Page 5 and 6:
This guide is copyrighted ©2013 by
Page 7 and 8:
This book is dedicated to musicians
Page 9 and 10:
Andy CookAvid Learning Partner Prog
Page 11 and 12:
ContentsIntroductionPART IBackgroun
Page 13 and 14:
Time Scales and RulersMain Time Sca
Page 15 and 16:
Importing VideoEXERCISE 4 Importing
Page 17 and 18:
EXERCISE 6 Configuring the Session
Page 19 and 20:
Considerations for Bouncing AudioBo
Page 21 and 22:
Connect Monitoring DevicesCreating
Page 23 and 24:
IntroductionCongratulations on ente
Page 25 and 26:
▪ Miking techniques▪ Mixer sign
Page 27 and 28:
The Avid Learning Partner ProgramPr
Page 29 and 30:
design, enabling authorized trainin
Page 31 and 32:
PART IBackground InformationOVERVIE
Page 33 and 34:
At its core, Pro Tools is a multi-t
Page 35 and 36:
and modifying sound effects, music,
Page 37 and 38:
Digidesign continued to develop sof
Page 39 and 40:
By March 1995, Pro Tools was recogn
Page 41 and 42:
In 2002, Pro Tools|HD systems were
Page 43 and 44:
A VENUE system is built around one
Page 45 and 46:
speed Ethernet control protocol to
Page 47 and 48:
processors, run more plug-ins, and
Page 49 and 50:
are synonymous—15,000 CPS is the
Page 51 and 52:
Most professional digital recording
Page 53 and 54:
Pro Tools System ConfigurationsThe
Page 55 and 56:
Source: Avid ® .The Mbox Pro is a
Page 57 and 58:
Source: Avid ® .Figure 1.20 003 Ra
Page 59 and 60:
Source: Avid ® .HD MADIHD MADI is
Page 61 and 62:
Delete keyBackspace keyFile-Naming
Page 63 and 64:
EXERCISE 1Pro Tools HardwareIn this
Page 65 and 66:
❏ Standard Pro Tools software❏
Page 67 and 68:
New features introduced in Pro Tool
Page 69 and 70:
When audio is recorded into a Pro T
Page 71 and 72:
Powering Up Your HardwareWhen start
Page 73 and 74:
Tip: Mac users might want to create
Page 75 and 76:
Source: Avid ® .The Pro Tools Soft
Page 77 and 78:
and operations, and for adjusting v
Page 79 and 80:
Source: Avid ® .Edit ToolsPro Tool
Page 81 and 82:
Source: Avid ® .Pro Tools lets you
Page 83 and 84:
Source: Avid ® .Customizing the To
Page 85 and 86:
Figure 2.14 Moving controls in the
Page 87 and 88:
Source: Avid ® .Record and Playbac
Page 89 and 90:
Source: Avid ® .As with the Edit w
Page 91 and 92:
functions of the MIDI controls are
Page 93 and 94:
The Tile command arranges open wind
Page 95 and 96:
Source: Avid ® .To use the Zoomer
Page 97 and 98:
highlighted in the Edit window. In
Page 99 and 100:
Tip: Dragging the Scrubber tool bet
Page 101 and 102:
In Shuffle mode, clip movement is c
Page 103 and 104:
Source: Avid ® .▪ Select the des
Page 105 and 106:
Pro Tools provides two types of Rul
Page 107 and 108:
▪ ALT-CLICK (Windows) or OPTION-C
Page 109 and 110:
enable metronome playback is to set
Page 111 and 112:
Review/Discussion Questions1. Name
Page 113 and 114:
EXERCISE 2The Software InterfaceIn
Page 115 and 116:
8. The signal routing controls labe
Page 117 and 118:
22. The button labeled C in Figure
Page 119 and 120:
LESSON 9EXERCISE 8LESSON 10EXERCISE
Page 121 and 122:
Shortcut: Press CTRL+UP ARROW or DO
Page 123 and 124:
A sample rate of 44.1 kHz, the indu
Page 125 and 126:
Source: Avid ® .Using the dialog b
Page 127 and 128:
Source: Avid ® .Track FormatWithin
Page 129 and 130:
tracks to the Timeline and use mult
Page 131 and 132:
Source: Avid ® .Shortcut: Press CT
Page 133 and 134:
The edit cursor is a flashing line
Page 135 and 136:
Page ScrollingTo scroll the Edit wi
Page 137 and 138:
Locating a SessionWorkspace browser
Page 139 and 140:
Source: Avid ® .Opening a SessionO
Page 141 and 142:
9. Which tool can be used to set th
Page 143 and 144:
Source: Avid ® .Tip: You may need
Page 145 and 146:
2. Choose VIEW > MAIN COUNTER > BAR
Page 147 and 148:
LESSON 4Making Your First Audio Rec
Page 149 and 150:
Disk Usage WindowWith a session run
Page 151 and 152:
Source: Avid ® .Tip: Additional de
Page 153 and 154:
Source: Avid ® .When a track has b
Page 155 and 156:
Source: Avid ® .Example: Suppose y
Page 157 and 158:
4. Click the RECORD button in the T
Page 159 and 160:
Source: Avid ® .Note that clips on
Page 161 and 162:
▪ Right-click on the file or clip
Page 163 and 164: are cleared on the hard drive.Figur
Page 165 and 166: Source: Avid ® .If no other confir
Page 167 and 168: 10. What types of clips are represe
Page 169 and 170: understand whether the file can be
Page 171 and 172: Professional format offers high-qua
Page 173 and 174: ▪ Comments. The area along the bo
Page 175 and 176: 5. If any audio files or clips are
Page 177 and 178: b. Choose the volume or folder that
Page 179 and 180: The files will be automatically con
Page 181 and 182: Source: Avid ® .4. Select the desi
Page 183 and 184: 9. How would you go about importing
Page 185 and 186: 2. Copy the following audio files i
Page 187 and 188: 1. Choose FILE > SAVE to save the s
Page 189 and 190: audio file in that MIDI data does n
Page 191 and 192: 3. Select either MIDI TRACK or INST
Page 193 and 194: Though MIDI tracks are typically ti
Page 195 and 196: also want to set the key signature
Page 197 and 198: Figure 6.7 The Tempo Change dialog
Page 199 and 200: Source: Avid ® .3. Click OK to ins
Page 201 and 202: To display the Instrument view, do
Page 203 and 204: keyboard could receive double MIDI
Page 205 and 206: To enable Input Quantize, do the fo
Page 207 and 208: Source: Avid ® .Tip: Stereo Instru
Page 209 and 210: Source: Avid ® and inMusic®.The p
Page 211 and 212: Source: Avid ® and inMusic®.Using
Page 213: Source: Avid ® and inMusic®.Using
Page 217 and 218: 3. Click PLAY in the Transport wind
Page 219 and 220: Source: Avid ® .Tip: When Zoom Tog
Page 221 and 222: Source: Avid ® .Figure 6.32 Toggli
Page 223 and 224: 11. What kind of virtual instrument
Page 225 and 226: 1. Click on the HORIZONTAL ZOOM IN
Page 227 and 228: Figure EX5.4 The Vacuum plug-in win
Page 229 and 230: 3. Click the RECORD button in the T
Page 231 and 232: LESSON 7Selecting and NavigatingThi
Page 233 and 234: 2. Drag up or down to change the he
Page 235 and 236: end, and length values for the Time
Page 237 and 238: 2. Drag the TIMELINE SELECTION OUT
Page 239 and 240: 5. Press RETURN or ENTER to confirm
Page 241 and 242: Source: Avid ® .Selecting Material
Page 243 and 244: OPTION+TAB (Mac). With each press o
Page 245 and 246: ▪ To select from the current curs
Page 247 and 248: 2. Choose the desired height from t
Page 249 and 250: Source: Avid ® .Using the Zoomer T
Page 251 and 252: Figure 7.23 Zoom Toggle buttonSourc
Page 253 and 254: Source: Avid ® .To store a zoom se
Page 255 and 256: Figure 7.27 The New Memory Location
Page 257 and 258: Source: Avid ® .Recalling a Marker
Page 259 and 260: 4. Describe two ways to make an Edi
Page 261 and 262: • Tab to Transients• Link Timel
Page 263 and 264: 5. Change the marker name from Loca
Page 265 and 266:
To simplify your navigation and wor
Page 267 and 268:
▪ Shuffle. This mode allows you t
Page 269 and 270:
Spot mode allows you to specify a d
Page 271 and 272:
you edit your session. The Grid set
Page 273 and 274:
Tip: The Follow Main Time Scale opt
Page 275 and 276:
Note: When you cut or clear a selec
Page 277 and 278:
1. Make a selection of any length a
Page 279 and 280:
Source: Avid ® .When you separate
Page 281 and 282:
Source: Avid ® .Moving and Trimmin
Page 283 and 284:
automatically snap to each other li
Page 285 and 286:
Source: Avid ® .4. Click the curso
Page 287 and 288:
move the selected clip or clips wit
Page 289 and 290:
Tip: If you are using a laptop comp
Page 291 and 292:
Source: Avid ® .3. Choose the desi
Page 293 and 294:
is available, the crossfade will ap
Page 295 and 296:
1. Choose SETUP > PREFERENCES and t
Page 297 and 298:
Source: Avid ® .The following acti
Page 299 and 300:
Source: Avid ® .Restoring from Ses
Page 301 and 302:
11. How would you go about creating
Page 303 and 304:
To remove silence before the drum p
Page 305 and 306:
inside the clip and drag to the rig
Page 307 and 308:
InputsThe term input refers to an a
Page 309 and 310:
Source: Avid ® .Configuring the Mi
Page 311 and 312:
Source: Avid ® . ©2013 Frank D. C
Page 313 and 314:
Source: Avid ® .Tip: The Inserts a
Page 315 and 316:
To route a send to an external devi
Page 317 and 318:
Source: Avid ® .3. Begin playback
Page 319 and 320:
Pro Tools also allows you to view a
Page 321 and 322:
Plug-ins can be used in mono, multi
Page 323 and 324:
plug-in can be added to a track to
Page 325 and 326:
Review/Discussion Questions1. What
Page 327 and 328:
EXERCISE 8Arranging Audio and Creat
Page 329 and 330:
Figure EX8.2 Setting the start time
Page 331 and 332:
Source: Avid ®2. Click on INSERT S
Page 333 and 334:
LESSON 10Finishing Your WorkThis le
Page 335 and 336:
▪ It allows you to back up an ent
Page 337 and 338:
out.) If the Audio Files option is
Page 339 and 340:
Source: Gobbler ® .4. Select the d
Page 341 and 342:
▪ Bounced material is automatical
Page 343 and 344:
Source: Avid ® .8. Allow recording
Page 345 and 346:
Source: Avid ® .4. Choose FILE > B
Page 347 and 348:
respectively. This file format can
Page 349 and 350:
Figure 10.10 The Bounce to Disk pro
Page 351 and 352:
Tip: For more information on SoundC
Page 353 and 354:
the track is posted.) You can also
Page 355 and 356:
Source: Avid ® .6. Enter your user
Page 357 and 358:
2. Select the desired files in iTun
Page 359 and 360:
2. How is the Save Copy In command
Page 361 and 362:
3. If needed, click on the MUTE but
Page 363 and 364:
5. If any MIDI notes remain overhan
Page 365 and 366:
OVERVIEWPART IIIHands-On ProjectsPa
Page 367 and 368:
To complete these projects, you wil
Page 369 and 370:
PROJECT 1Music Hands-On ProjectIn t
Page 371 and 372:
c. Type Music Project PT11 in the t
Page 373 and 374:
3. Press CTRL+= (Windows) or COMMAN
Page 375 and 376:
Source: Avid ®4. Click OK to close
Page 377 and 378:
Source: Avid ®Name and reposition
Page 379 and 380:
Insert Xpand! 2 onto the Drums trac
Page 381 and 382:
2. With the GRABBER tool, select th
Page 383 and 384:
Source: Avid ®3. With the PENCIL t
Page 385 and 386:
Source: Avid ® and inMusic®5. Cli
Page 387 and 388:
white, and the corresponding note w
Page 389 and 390:
4. Close the Workspace browser to r
Page 391 and 392:
Select the location to insert time
Page 393 and 394:
Source: Avid ®6. Click the GRID bu
Page 395 and 396:
2. Open the Memory Locations window
Page 397 and 398:
Bus 1 (Verb). Therefore, all you wi
Page 399 and 400:
Save Work in ProgressBefore continu
Page 401 and 402:
It is often useful to create a scor
Page 403 and 404:
Source: Avid ®Configure the staff
Page 405 and 406:
Source: Avid ®Adjust the Maxim set
Page 407 and 408:
Make a 16-bit stereo bounce of your
Page 409 and 410:
Remove Unused MaterialTo save disk
Page 411 and 412:
PROJECT 2Post Hands-On ProjectIn th
Page 413 and 414:
a. Choose WINDOW > NEW WORKSPACE.b.
Page 415 and 416:
Page 417 and 418:
Source: Avid ®5. Click OK to close
Page 419 and 420:
5. Double-click on the track name (
Page 421 and 422:
5. Select SESSION START in the Loca
Page 423 and 424:
Source: Avid ®4. Click DONE. The A
Page 425 and 426:
3. When the clip ends, press the SP
Page 427 and 428:
Source: Avid ®6. If needed, set th
Page 429 and 430:
Gradually move the mouse back and f
Page 431 and 432:
Change the MusicNext you will need
Page 433 and 434:
Source: Avid ®2. Press E on your k
Page 435 and 436:
Page 437 and 438:
are not real-time processors. These
Page 439 and 440:
Source: Avid ®2. With Loop Playbac
Page 441 and 442:
3. If needed, choose VIEW > NARROW
Page 443 and 444:
Now that your project is complete,
Page 445 and 446:
PART IVCourse Completion Informatio
Page 447 and 448:
Source: Avid ®Additional ProjectsA
Page 449 and 450:
Additional certification options ar
Page 451 and 452:
▪ POW-r Dither. An advanced type
Page 453 and 454:
APPENDIX BAIR Creative Collection P
Page 455 and 456:
IndexNumerics003 family, 19003 Rack
Page 457 and 458:
Eleven Rack, 18-19exercise, 25-26HD
Page 459 and 460:
mixdown technique, 213Post Hands-On
Page 461 and 462:
Mix window, 40-41Comments area (Imp
Page 463 and 464:
Digidesigngrammy award, 9history of
Page 465 and 466:
toolbar, customizing, 37-38editingC
Page 467 and 468:
MIDI, 29organization, 28rendered, 3
Page 469 and 470:
Hertz (Hz), 14Hide Views function,
Page 471 and 472:
Key Change dialog box, 116key signa
Page 473 and 474:
Controls, 119controlsCountoff contr
Page 475 and 476:
description, 192displaying and hidi
Page 477 and 478:
Session windows oriented for, 239-2
Page 479 and 480:
Avid audio, 21Avid Channel Strip, 2
Page 481 and 482:
importing media, 269-272knock sweet
Page 483 and 484:
mixing exercise, 276-282powering up
Page 485 and 486:
Reverse plug-in, 292Revert to Saved
Page 487 and 488:
on selected tracks, 146Tab key, 147
Page 489 and 490:
Transport window controls and displ
Page 491 and 492:
Tap Tempo mode, 115Tempo field, 54T
Page 493 and 494:
playback point, 71shortcuts, 68size
Page 495 and 496:
WaveCache file, 28-29waveform, 14wi
show all

Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?