Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

Bus 1 (Verb). Therefore, all you will need to do is increase the level of the
send on the Guitar track to add reverb to the mix.
Increase the Send A level on the Guitar track:
1. Click on SEND ASSIGNMENT A on the Guitar track. The Send A window
will appear.
2. Click the SOLO (S) button in the Send A window to solo the Guitar
track.
3. Press the SPACE BAR to begin playback.
4. While listening to the track, raise the level on the Send Fader to
introduce reverb. (Try between –10 and –6 dB.)
The reverb will play back while the Guitar track is soloed because the
Reverb track is set to Solo Safe mode. Solo Safe mode is commonly used
on Auxiliary tracks to prevent them from being muted when another track
is soloed.
Tip: You can place a track in Solo Safe mode by CTRL-CLICKING
(Windows) or COMMAND-CLICKING (Mac) on the Solo button in the Edit
or Mix window.
Figure PR1.24 The Send A window