Pro Tools 101_ An Introduction to Pro Tools 11 ( PDFDrive )

4. Close the Workspace browser to reduce on-screen clutter.
Use Clip Looping
Now that you’ve imported the audio file, it’s time to clean it up and loop it.
Clean up the audio file using the Trim tool:
1. Solo the Groove-E track.
2. With the TRIM tool, trim the end of the clip to 17|1|000. This will make
the clip exactly four bars long.
3. With the GRABBER tool, select the clip.
4. With Loop Playback enabled, press the SPACE BAR to audition the clip
and ensure that it loops smoothly.
5. Press the SPACE BAR again to stop playback and take the track out of Solo
mode.
Loop the clip:
1. With the Groove-E clip still selected, choose CLIP > LOOP. The Clip
Looping dialog box will appear on screen.
2. Select the LOOP LENGTH option and type 24|0|000 in the
corresponding field to extend the loop to 24 bars.
Figure PR1.18 The Clip Looping dialog box
Source: Avid ®
3. Click OK.