(RPL) Assessment Tool Kit - WestOne
(RPL) Assessment Tool Kit - WestOne
(RPL) Assessment Tool Kit - WestOne
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Skill Set 4 – Simple electrical circuits<br />
Instructions for the candidate<br />
MEM50205 Diploma of Engineering Technical (Mechanical)<br />
Section 4 – Practical Tasks and Observation Recording Sheets<br />
Task 6 – Analyse a simple electrical circuit and develop a circuit diagram<br />
For this task you will need to liaise with appropriate personnel in your workplace or with your<br />
Assessor to analyse a simple electrical circuit, taking the following steps:<br />
1. Establish the function and purpose of the circuit by gathering and interpreting all relevant<br />
drawings, specifications, manuals and documentation, and/or observing circuit and<br />
component installation.<br />
2. Develop a circuit diagram from the existing drawings ensuring that it meets appropriate<br />
AS. This should include:<br />
� Ohm’s law calculations and suitable conductor selection<br />
� series and parallel considerations<br />
� identifying appropriate components and assemblies.<br />
3. Have the final result assessed as meeting the design requirements<br />
4. Outline and apply the hazard and control measures associated with the analysis.<br />
(This may be a low voltage, electronic, medium or high voltage circuit depending upon your<br />
industry.)<br />
Page 111 of 206 © Department of Education and Training 2009<br />
Version 1, July 2009