(RPL) Assessment Tool Kit - WestOne

Recommendations

Info

MEM50205 Diploma of Engineering – Technical (Mechanical) Section 7 – Mapping of Assessment Tools Skill Set 1 – Engineering foundations Units of competency MEM30012A Apply mathematical techniques in a manufacturing, engineering or related environment MEM12025A Use graphical techniques and perform simple statistical computations Units of competency MEM16006A Organise and communicate information MEM16008A Interact with computing technology MEM12024A Perform computations Element Performance Criteria Interview Topic Practical Tasks Supplementary Evidence MEM30012A Apply mathematical techniques in a manufacturing engineering or related environment Topic 2 a) Task 2, Problem Seven 7.1 Mean, median and mode are calculated from given data. Element 7 – Perform basic statistical calculations Topic 2 a) Task 2, Problem Seven 7.2 Standard deviation is calculated and interpreted employing graphical representation. � � Required skills Topic 2 a), b) Task 2 Required knowledge Topic 2 a), b) Task 2 Dimensions of competency Topic 2 a), b) � © Department of Education and Training 2008 Page 180 of 206 Version 1, July 2009
MEM50205 Diploma of Engineering – Technical (Mechanical) Section 7 – Mapping of Assessment Tools Skill Set 2 – Engineering drafting and design Units of competency Units of competency MEM30001A Use computer-aided drafting systems to produce engineering drawings MEM30004A Use CAD to create and display 3-D models MEM30003A Produce detailed engineering drawings MEM30002A Produce basic engineering graphics Element Performance Criteria Interview Topic Practical Tasks Supplementary Evidence MEM30001A Use computer-aided drafting systems to produce basic engineering drawings Topic 3 a) b) Task 3 a) or 10 f) 1.1 All relevant manuals, instructions and operating procedures for the CAD software are obtained in Element 1 – Prepare the CAD environment accordance with workplace procedures. Topic 3 b) Task 3 a) or 10 f) 1.2 The CAD package is booted up in accordance with workplace procedures. Topic 3 b) Task 3 a) or 10 f) Topic 3 a) b) Task 3 b) or 10 f) Topic 3 b) Task 3 b) or 10 f) 1.3 Screen display areas and basic parameters are set in accordance with instructions. 2.1 Basic CAD drawings are created and guidance is sought as required. 2.2 Drawings are prepared in accordance with AS 1100 or equivalent or in accordance with standard Element 2 – Produce a basic drawing operating procedures. Topic 3 b) Task 3 b) or 10 f) 2.3 As required, CAD drawings are reviewed with supervisor and/or other designated staff in accordance with company procedures. Topic 3 c) Task 3 b) or 10 f) 3.1 Existing CAD drawings are located and modified by adding, deleting or changing drawing elements Element 3 – Modify existing CAD drawings within that drawing. Element 4 – Product output 4.1 Drawing files are saved in the appropriate format Topic 3 c) Task 3 f) or 10 f) in accordance with standard operating procedures. 4.2 Drawing files are printed out using plotter or Topic 3 c) Task 3 f) or 10 f) equivalent devices. Element 5 – Perform exit and 5.1 Programs and computer are shut down in Topic 3 c) Task 3 j) or 10 f) shutdown procedures accordance with workplace procedures. Required skills Topic 3 a)–c) Task 3 or 10 Required knowledge Topic 3 a)–c) Task 3 or 10 Dimensions of competency Topic 3 a)–c) � � Employability skills Technology � � Problem solving Page 181 of 206 © Department of Education and Training 2009 Version 1, July 2009
Page 1 and 2:
Department of Education and Trainin
Page 3 and 4:
Contents MEM50205 Diploma of Engine
Page 5 and 6:
MEM50205 Diploma of Engineering - T
Page 7 and 8:
STEP 1 STEP 2 STEP 3 STEP 4 MEM5020
Page 9 and 10:
Page 11 and 12:
Introduction MEM50205 Diploma of En
Page 13 and 14:
Page 15 and 16:
Qualification Rules MEM50205 Diplom
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
Page 49 and 50:
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Page 63 and 64:
Page 65:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130 and 131: MEM50205 Diploma of Engineering - T
Page 148 and 149: MEM30205 Certificate III in Enginee
Page 206: MEM50205 Diploma of Engineering - T
show all

(RPL) Assessment Tool Kit - WestOne

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?