(RPL) Assessment Tool Kit - WestOne

MEM50205 Diploma of Engineering – Technical (Mechanical)
Section 7 – Mapping of Assessment Tools
Skill Set 7 – Engineering science
Units of competency
MEM14081A Apply mechanical engineering fundamentals to support design and
development of projects
MEM23071A Select and apply mechanical engineering methods, processes and
construction techniques
Units of competency
MEM23041A Apply basic scientific principles and techniques in mechanical engineering
situations
MEM23051A Apply basic electro and control scientific principles and techniques in
mechanical and manufacturing engineering situations
Element Performance Criteria Interview Topic Practical Tasks Supplementary Evidence
MEM14081A Apply mechanical engineering fundamentals to support design and development of projects
Topic 11 d) e) Task 10 e)
4.1 Appropriate basic scientific principles and
techniques are applied in support of selection of
resources for engineering applications.
Topic 11 e) Task 10 e)
4.2 Appropriate calculations and assumptions are
used to enable choices of resources for
engineering.
Element 4 – Apply engineering
fundamentals in support of
selection of resources for
engineering applications based
on functional or performance
specification of system and
components5
Topic 11 e) Task 10 e)
4.3 Appropriate materials properties, methods and
processes knowledge is applied in support of
selection of resources for engineering
applications.
Topic 11 d) e) Task 10 e)
4.4 Appropriate resources have been chosen for the
engineering application. Selections should be
based on functional or performance specification
of system and components of application.
Topic 11 d) e) Task 10 e)
5.1 Specify resources, and technical support for
engineering applications sufficient to facilitate
their identification and supply.
Topic 11 d) Task 10 e)
5.2 Suppliers of resources and technical support are
identified.
Element 5 – Specify resources
and technical support for
engineering applications
sufficient to facilitate their
identification and supply.
Topic 11 f) Task 10 f)
6.1 Contribute significantly to the creation of design,
implementation, installation, commissioning and
maintenance procedures and documents for
specific engineering applications.
Element 6 – Assist with the
design specifications and
development procedures for
engineering applications
Topic 11 f) Task 10 f)
6.2 Implement appropriate computing and
programming techniques in the process of
development of design specifications and
documentation for specific engineering
applications.
© Department of Education and Training 2008 Page 202 of 206
Version 1, July 2009