(RPL) Assessment Tool Kit - WestOne

MEM50205 Diploma of Engineering – Technical (Mechanical)
Section 5 – Candidate’s Information and Self-Evaluation Forms
Skill Set 2 – Engineering drafting and design
Candidate’s name Date completed
I have performed these tasks Evidence to support claim
Supervisor’s
Documentation provided
Skill Set 2
Evaluation Doc
No.
Competency/Task Frequently Never Sometimes
(Number and name the document you are providing for easy reference.)
1. Interpreting technical drawings.
2. Using a CAD system to produce basic
engineering drawings and specifying the types of
drawings you have completed, eg mechanical
component, structural, steel piping and
instrument drawings.
3. Locating, modifying, saving and printing existing
CAD drawings.
4. Reading and interpreting design specifications to
identify drawing requirements in order to produce
basic engineering graphics.
5. Drawing sections through an engineering
component and demonstrating the correct use of
cutting plane symbols and conventions.
6. Selecting components and materials from
manufacturers’ catalogues according to design
specifications.
7. Preparing an engineering parts list or completing
a parts list on engineering drawings.
8. Using a CAD program to produce and plot basic
3-D view drawings and models.
Page 151 of 206 © Department of Education and Training 2009
Version 1, July 2009