(RPL) Assessment Tool Kit - WestOne
(RPL) Assessment Tool Kit - WestOne
(RPL) Assessment Tool Kit - WestOne
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MEM50205 Diploma of Engineering – Technical (Mechanical)<br />
Section 7 – Mapping of <strong>Assessment</strong> <strong>Tool</strong>s<br />
Skill Set 2 – Engineering drafting and design<br />
Units of competency<br />
MEM30004A Use CAD to create and display 3-D models<br />
MEM30002A Produce basic engineering graphics<br />
Units of competency<br />
MEM30001A Use computer-aided drafting systems to produce engineering drawings<br />
MEM30003A Produce detailed engineering drawings<br />
Element Performance Criteria Interview Topic Practical Tasks Supplementary Evidence<br />
MEM30007A Select common engineering materials<br />
Topic 4 a) Task 5<br />
1.1 The principal properties of ferrous and non-ferrous<br />
metals are identified.<br />
Element 1 – Identify common<br />
engineering materials by their<br />
principal properties<br />
Topic 4 a) Task 5<br />
1.2 The principal properties of thermosetting and<br />
thermoplastic polymers are identified.<br />
Topic 4 a) Task 5<br />
1.3 The principal properties of ceramics and<br />
composite materials are identified.<br />
Topic 4 a) Task 5<br />
1.4 The effects of different types of bonding in<br />
materials are identified.<br />
Topic 4 a) Task 5<br />
1.5 The effects of mechanical and thermal processes<br />
on the principal properties of materials are<br />
identified.<br />
Topic 4 b) c) Task 5<br />
2.1 The engineering requirement for the specific<br />
application is determined in consultation with<br />
others.<br />
Element 2 – Select materials for<br />
specific applications<br />
Topic 4 b) c) Task 5<br />
2.2 Material is selected based on the requirement and<br />
consideration of principal properties and further<br />
processing.<br />
Topic 4 b) c) Task 5<br />
2.3 Selection is confirmed according to standard<br />
operating procedures.<br />
Topic 4 b) c) Task 5<br />
3.1 Appropriate tests for the required properties are<br />
identified.<br />
Element 3 – Verify selected<br />
material as fit for purpose<br />
Topic 4 b) c) Task 5<br />
3.2 Testing of materials is arranged with appropriate<br />
persons, if necessary.<br />
Topic 4 b) c) Task 5<br />
3.3 Test results are analysed and material choices<br />
are confirmed or modified as appropriate.<br />
Page 185 of 206 © Department of Education and Training 2009<br />
Version 1, July 2009