(RPL) Assessment Tool Kit - WestOne

MEM50205 Diploma of Engineering – Technical (Mechanical)
Section 7 – Mapping of Assessment Tools
Skill Set 7 – Engineering science
Units of competency
MEM14081A Apply mechanical engineering fundamentals to support design and
development of projects
MEM23071A Select and apply mechanical engineering methods, processes and
construction techniques
Units of competency
MEM23041A Apply basic scientific principles and techniques in mechanical engineering
situations
MEM23051A Apply basic electro and control scientific principles and techniques in
mechanical and manufacturing engineering situations
Element Performance Criteria Interview Topic Practical Tasks Supplementary Evidence
MEM23051A Apply basic electro and control scientific principles and techniques in mechanical and manufacturing engineering situations
Topic 10 e) f) Task 10 a) b) c)
1.1 The basic electro and control scientific principles
relating to mechanical and manufacturing
engineering, researched and reported on from
appropriate sources of information and
examination of applications.
Element 1 – Research and
identify the range of basic
electro and control scientific
principles and techniques
relevant to mechanical and
manufacturing engineering
Topic 10 e) f) Task 10 b) c)
1.2 The basic electro and control techniques and
associated technologies, software and hardware
required to implement scientific principles relating
to mechanical and manufacturing engineering
situations and reported.
Topic 10 f) g) Task 10 e)
2.1 For particular mechanical and manufacturing
engineering situations, the relevant basic electro
and control scientific principles can be selected.
Topic 10 f) g) Task 10 e)
Element 2 – Select basic electro
and control scientific principles
and techniques relevant to
particular mechanical and
manufacturing engineering
applications
2.2 For particular mechanical and manufacturing
engineering situations, the relevant basic electro
and control techniques and associated
technologies, software and hardware can be
selected.
Topic 10 g) Task 10 e)
3.1 The basic electro and control scientific principles
are applied in a consistent and appropriate
manner to obtain any required solution.
Element 3 – Apply the relevant
basic electro and control
scientific principles and
techniques appropriately
Topic 10 h) Task 10 e)
3.2 Appropriate calculations and coherent units are
used in the solution of engineering calculations.
Topic 10 h) Task 10 e)
3.3 Significant figures are used in engineering
calculations.
Page 199 of 206 © Department of Education and Training 2009
Version 1, July 2009