(RPL) Assessment Tool Kit - WestOne
(RPL) Assessment Tool Kit - WestOne
(RPL) Assessment Tool Kit - WestOne
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
MEM50205 Diploma of Engineering – Technical (Mechanical)<br />
Section 7 – Mapping of <strong>Assessment</strong> <strong>Tool</strong>s<br />
Skill Set 2 – Engineering drafting and design<br />
Units of competency<br />
Units of competency<br />
MEM30001A Use computer-aided drafting systems to produce engineering drawings MEM30004A Use CAD to create and display 3-D models<br />
MEM30003A Produce detailed engineering drawings<br />
MEM30002A Produce basic engineering graphics<br />
Element Performance Criteria Interview Topic Practical Tasks Supplementary Evidence<br />
MEM30001A Use computer-aided drafting systems to produce basic engineering drawings<br />
Topic 3 a) b) Task 3 a) or 10 f)<br />
1.1 All relevant manuals, instructions and operating<br />
procedures for the CAD software are obtained in<br />
Element 1 – Prepare the CAD<br />
environment<br />
accordance with workplace procedures.<br />
Topic 3 b) Task 3 a) or 10 f)<br />
1.2 The CAD package is booted up in accordance<br />
with workplace procedures.<br />
Topic 3 b) Task 3 a) or 10 f)<br />
Topic 3 a) b) Task 3 b) or 10 f)<br />
Topic 3 b) Task 3 b) or 10 f)<br />
1.3 Screen display areas and basic parameters are<br />
set in accordance with instructions.<br />
2.1 Basic CAD drawings are created and guidance is<br />
sought as required.<br />
2.2 Drawings are prepared in accordance with AS<br />
1100 or equivalent or in accordance with standard<br />
Element 2 – Produce a basic<br />
drawing<br />
operating procedures.<br />
Topic 3 b) Task 3 b) or 10 f)<br />
2.3 As required, CAD drawings are reviewed with<br />
supervisor and/or other designated staff in<br />
accordance with company procedures.<br />
Topic 3 c) Task 3 b) or 10 f)<br />
3.1 Existing CAD drawings are located and modified<br />
by adding, deleting or changing drawing elements<br />
Element 3 – Modify existing<br />
CAD drawings<br />
within that drawing.<br />
Element 4 – Product output 4.1 Drawing files are saved in the appropriate format Topic 3 c) Task 3 f) or 10 f)<br />
in accordance with standard operating<br />
procedures.<br />
4.2 Drawing files are printed out using plotter or Topic 3 c) Task 3 f) or 10 f)<br />
equivalent devices.<br />
Element 5 – Perform exit and 5.1 Programs and computer are shut down in<br />
Topic 3 c) Task 3 j) or 10 f)<br />
shutdown procedures<br />
accordance with workplace procedures.<br />
Required skills Topic 3 a)–c) Task 3 or 10<br />
Required knowledge Topic 3 a)–c) Task 3 or 10<br />
Dimensions of competency Topic 3 a)–c) � �<br />
Employability skills Technology � �<br />
Problem solving<br />
Page 181 of 206 © Department of Education and Training 2009<br />
Version 1, July 2009