(RPL) Assessment Tool Kit - WestOne
(RPL) Assessment Tool Kit - WestOne
(RPL) Assessment Tool Kit - WestOne
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MEM50205 Diploma of Engineering – Technical (Mechanical)<br />
Section 7 – Mapping of <strong>Assessment</strong> <strong>Tool</strong>s<br />
Skill Set 3 – Engineering materials<br />
Units of competency<br />
MEM23061A Select and test mechanical engineering materials<br />
Units of competency<br />
MEM30007A Select common engineering materials<br />
Element Performance Criteria Interview Topic Practical Tasks Supplementary Evidence<br />
MEM23061A Select and test mechanical engineering materials<br />
Topic 5 c) d) Task 5 or 10 e)<br />
2.1 Identify and use appropriate sources of<br />
information on materials.<br />
Topic 5 c) d) Task 5 or 10 e)<br />
2.2 Identify and use appropriate sources of<br />
information on methods of testing of properties of<br />
materials to ensure suitability for a particular<br />
application.<br />
Element 2 – Identify and use<br />
sources of information on<br />
engineering materials, materials<br />
tests and test equipment<br />
including manufacturers’<br />
catalogues and websites<br />
Topic 5 c) d) Task 5 or 10 e)<br />
2.3 Identify and use appropriate sources of<br />
information on materials, materials tests, test<br />
calibration, test certificates, regulations,<br />
standards, standards<br />
councils/societies/authorities/regulatory bodies.<br />
Investigate and report on the use of standards<br />
and codes.<br />
Topic 5 c) d) Task 5 or 10 e)<br />
2.4 Identify and use appropriate sources of<br />
information on material safety data sheets<br />
(MSDS).<br />
Topic 5 d) e) Task 5 or 10 e)<br />
3.1 Required materials tests are specified and<br />
implementation of tests is managed to ensure<br />
quality, safety or suitability for a range of<br />
applications. Ensure traceability of measurement<br />
standard.<br />
Element 3 – Specify and<br />
implement methods used to test<br />
or obtain the properties of<br />
engineering materials<br />
Topic 5 d) e) Task 5 or 10 e)<br />
3.2 Obtain test sheets/certificates for appropriate<br />
materials for applications in accordance with<br />
organisational procedures and/or codes and<br />
regulations.<br />
Topic 5 d) e) Task 5 or 10 e)<br />
3.3 Obtain appropriate material safety data sheets<br />
(MSDS) for applications in accordance with<br />
organisational procedures and/or codes and<br />
regulations.<br />
© Department of Education and Training 2008 Page 188 of 206<br />
Version 1, July 2009