(RPL) Assessment Tool Kit - WestOne
(RPL) Assessment Tool Kit - WestOne
(RPL) Assessment Tool Kit - WestOne
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
MEM50205 Diploma of Engineering – Technical (Mechanical)<br />
Section 7 – Mapping of <strong>Assessment</strong> <strong>Tool</strong>s<br />
Skill Set 2 – Engineering drafting and design<br />
Units of competency<br />
MEM30004A Use CAD to create and display 3-D models<br />
MEM30002A Produce basic engineering graphics<br />
Units of competency<br />
MEM30001A Use computer-aided drafting systems to produce engineering drawings<br />
MEM30003A Produce detailed engineering drawings<br />
Element Performance Criteria Interview Topic Practical Tasks Supplementary Evidence<br />
MEM30003A Produce detailed engineering drawings<br />
Topic 3 a) Task 3 b) or 10 f)<br />
1.1 Drawing requirements are checked and<br />
interpreted from work order or similar.<br />
Element 1 – Determine drawing<br />
requirements<br />
Topic 3 j) Task 3 b) or 10 f)<br />
1.2 Required information is sourced from workshop<br />
manuals, customer specifications, product<br />
suppliers, designers or similar.<br />
Topic 3 j) Task 3 b) or 10 f)<br />
1.3 Scope of drawing including layout, additional<br />
required information and resources is planned.<br />
Topic 3 j) Task 3 c) or 10 f)<br />
2.1 Drawing details including assembly and<br />
components are completed as per AS 1100 or<br />
similar.<br />
Element 2 – Produce detailed<br />
drawings in third angle<br />
projection, including auxiliary<br />
views, sections and assemblies<br />
Topic 3 j) Task 3 d) or 10 f)<br />
2.2 Dimensions of various components are<br />
determined and inserted where required.<br />
Topic 3 j) Task 3 d) or 10 f)<br />
2.3 Appropriate symbols for limits and fits, surface<br />
texture and geometric tolerances are included.<br />
Topic 3 j) Task 3 e) or 10 f)<br />
2.4 Simple components or layouts are drawn in third<br />
angle projection.<br />
Topic 3 j) Task 3 c) or 10 f)<br />
2.5 An auxiliary view is drawn of a component, given<br />
two views.<br />
2.6 Correct convention for parts is shown. Topic 3 j) Task 3 d) or 10 f)<br />
Topic 3 k) Task 3 or 10<br />
3.1 Drawing is issued and/or filed according to<br />
workplace procedures.<br />
Element 3 – Issue and/or file<br />
drawing<br />
Required skills Topic 3 a)–k) Task 3 or 10 3 or 10<br />
Required knowledge Topic 3 a)–k) Task 3 or 10 3 or 10<br />
Dimensions of competency Topic 3 a)–k) � �<br />
Employability skills Technology � �<br />
Problem solving<br />
© Department of Education and Training 2008 Page 182 of 206<br />
Version 1, July 2009