Cutler-Hammer - Eaton Canada
Cutler-Hammer - Eaton Canada
Cutler-Hammer - Eaton Canada
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Note that parameters are listed with the notation<br />
ÒparameterÓ and the LCD Display is on the<br />
second line of the listing within parenthesis ().<br />
For example:<br />
Accel Time 2, parameter; 4-4, 4-15, A-2, A-4<br />
(ACCEL TIME 2)<br />
1<br />
1% Input Line Reactor; S-3, 2-6, 2-35<br />
100% I Limit; 5-2<br />
3<br />
3% and 5% Input Line Reactors; 2-6<br />
A<br />
Accel Time, parameter; 4-4, 4-15, A-2, A-4<br />
(ACCEL TIME)<br />
Accel Time 2, parameter; 4-4, 4-15, A-2, A-4<br />
(ACCEL TIME 2)<br />
Accel/Decel Mode, parameter; 4-4, 4-15, A-2, A-4<br />
(ACCEL/DECEL MODE)<br />
Accel/Decel2 or Jog, parameter; 4-4, 4-16, A-2, A-4<br />
(ACCEL2 OR JOG)<br />
ACCEL/DECEL 2, Range of Adjustment; 4-4, 4-16<br />
A/D OFFSET ERROR, fault message; 5-4<br />
AF93/IS903<br />
Associated Drive Motor; S-3, 2-5<br />
Drive Components; S-3<br />
Options; 2-6<br />
AF93/IS903 Circuit Breaker; 2-6, 2-12<br />
Input Line Considerations and; 2-12<br />
Lockable Motor Disconnect; 2-6<br />
Agency Standards; 2-39<br />
cUL; 2-39<br />
IEC-22G; 2-39<br />
NEMA-ICS 3.1; 2-39<br />
UL Standard 508C; 2-39<br />
UL Standard 840; 2-39<br />
Index<br />
Alert Symbol; S-1 to S-2<br />
Align Motor; 2-18<br />
Align Motor and Machinery and; 2-18<br />
Ambient Operating Conditions; 2-38<br />
Analog and Digital Conductor Routing; 2-14<br />
Input Line Routing and; 2-14<br />
Using Cable Trays; 2-14<br />
Using Conduit; 2-14<br />
Analog and Digital Conductor Wiring<br />
Output Power Conductor Routing and; 2-14<br />
Analog and Digital Signal Considerations; 2-14, 2-15<br />
Analog and Digital Conductor Wiring and; 2-14<br />
Analog and Digital Signal Wiring and; 2-14<br />
Analog and Digital Signal Wiring; 2-14, 2-17<br />
Grounding Requirements and; 2-14<br />
Materials and; 2-14<br />
Shielded Cable and; 2-14<br />
Wire Size and; 2-14<br />
Analog I/O Signal Transient Protection; 2-38<br />
Analog Inputs; 2-38<br />
ANALOG LOAD LIM, Range of Adjustment; 4-4, 4-13, 4-15,<br />
4-17 and 4-18<br />
Analog Outputs; 2-38<br />
Analog Output #x, parameter; 4-9, 4-23, A-3, A-4<br />
(ANALOG OUTPUT x)<br />
ANSI C62.41; 2-36<br />
Application Considerations; S-3, 2-6 and 2-7<br />
AF93/IS903 Adjustable Frequency Drive Options and; 2-6<br />
Motor Selection and; 2-7<br />
Applying AC Power; 2-19<br />
Article 500; S-3, 2-39<br />
National Electric Code and; S-3, 2-39<br />
ASTM D999; 2-39<br />
ASTM-896; 2-39<br />
AT SPEED, Range of Adjustment; 4-7, 4-8, 4-23<br />
Authority Having Jurisdiction; 2-8<br />
Available Options; 2-6<br />
1%, 3 % and 5% Input Line Reactors; 2-6<br />
AF93/IS903 Circuit Breaker; 2-6, 2-12<br />
Dynamic Braking; 2-29 and 2-30, 5-5<br />
Average Operating Motor Current; 2-7<br />
AF93/IS903 Instruction Manual<br />
I-1