Cutler-Hammer - Eaton Canada
Cutler-Hammer - Eaton Canada
Cutler-Hammer - Eaton Canada
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
AF93/IS903 Parameter List<br />
USING THE PARAMETERS<br />
AF93/IS903 Parameter List Legend<br />
Parameter Number<br />
Each parameter is numbered and the list<br />
presents the parameters in the same order they<br />
are displayed when you scroll them on the LCD<br />
(using the Up or Down buttons in the SCROLL<br />
mode). Indexing by parameter number makes it<br />
easy to find information on each parameter as<br />
you use your AF93/IS903 drive.<br />
Parameter<br />
(LCD Display)<br />
This column provides the full description of each<br />
parameter and its LCD display (mnemonic).<br />
The LCD Display appears within the parenthesis<br />
below each parameter name. This display<br />
appears on the upper line of the LCD when you<br />
are in the SETUP mode and are changing the<br />
parameter settings. The current setting of the<br />
parameter appears on the lower line of the LCD.<br />
Range of Adjustment<br />
This column provides the range of values you<br />
can choose from when you change the setting of<br />
a parameter.<br />
When the drive is in the CHANGE SETTINGS<br />
mode, use the Up or Down buttons to change<br />
the parameter data (numeric and alpha data) that<br />
appears on the lower line of the LCD.<br />
Some of the ranges depend upon the value you<br />
have set for another parameter. For example, the<br />
range of SPEED SETPOINT is ÒMinimum Speed<br />
to Maximum Speed.Ó This means that the range<br />
for this parameter starts at the value of MINIMUM<br />
SPEED and extends to the value of MAXIMUM<br />
SPEED.<br />
Note that instead of an analog value, some of the<br />
parameters, such as digital and analog outputs,<br />
provide a list of functions or conditions on the<br />
lower line of the LCD to choose from. These are<br />
noted with quotation marks (Ò Ó) in the Range of<br />
Adjustment column.<br />
When you set the value for a digital or analog<br />
output parameter, you choose the condition that<br />
will cause the relay contact to close (for<br />
RELAY 1 or 2) or for the analog voltage to be<br />
output (ANALOG OUTPUT #1 or #2).<br />
Notes<br />
AF93/IS903 Instruction Manual<br />
4-2<br />
This column provides specific information about<br />
using the parameter.<br />
Note that many parameters list Run Locked in<br />
this column. This means that you cannot change<br />
the settings for this parameter while the RUN<br />
indicator is lit.<br />
Factory Setting<br />
This is the value set at the factory for the<br />
parameter.<br />
Customer Setting<br />
Space is provided for you to write in the value for<br />
each parameter for your AF93/IS903. Photocopy<br />
this list and keep it handy so you can update your<br />
current setting as you customize your drive.