Cutler-Hammer - Eaton Canada

Pre-Installation
INSTALLATION
Handling of Drive After Delivery
Although every precaution is taken to ensure
that the unit is delivered in good condition, take
a moment to inspect your drive after it arrives at
your plant:
1. Inspect the shipping container for evidence
of rough handling immediately after the unit
arrives. Report all damage to the freight
carrier and your nearest Cutler-Hammer
customer support center and your Cutler-
Hammer sales representative.
2. Carefully unpack the drive, taking care to
save the shipping container and any packing
material should you need to return the unit at
a later date. Verify that the items on the
packing list or bill of lading agree with your
order.
AF93/IS903 Instruction Manual
2-4
! Warning
Large frame AF93/IS903 Adjustable Frequency
Drives may require more than one person to
move from one location to another. Observe
proper lifting techniques to avoid injury when
handling heavy electrical equipment.
3. If you are not installing the drive right away,
store the drive in a clean, dry, area where
the ambient temperature is between -4 to
158¡F (-20 to 70¡C) and less than or equal
to 95% humidity (non condensing).
Make sure the drive is not subject to a
corrosive atmosphere (such as H 2 S).